LaserMaster’s DeScaler is an effective way to maintain your equipment and extend it’s useful life.
Directions Of Use:
1. Drain the header tank on the machine
2. Pour 5 litres of DeScaler into the header tank
3. Run the machine until it is warm
4. Leave the solution in the machine overnight
5. Drain and flush out the solution from the machine and dispose of carefully
6. Check all filters on the machine’s water system and clear any limescale buildup
Do not carry out this procedure if frost is expected overnight.
AVOID CONTACT WITH EYES, SKIN AND CLOTHING
Do Not take internally.
Avoid Contact with Eyes Wash Thoroughly after handling.
First Aid: In Case Of Contact, immediately flush skin with soap and plenty of water.
Flush eyes immediately with lots of running water for at least 15 minutes holding eyelids open.
If swallowed, DO NOT INDUCE VOMITING, drink large quantities of water. Seek medical attention. Refer to MSDS for this product for further details.